AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
IMPORTANT NOTICE
THIS PART IS NOT SUITABLE FOR EUROPEAN AVANTGARDE AND AMG MODELS!
Congratulations on your purchase of an Arnott® air suspension product. We at Arnott Incorporated are proud
to offer a high quality product at the industry’s most competitive pricing. Thank you for your confidence in us
and our product.
Proper installation is essential to experience and appreciate the benefits of this system. Please take a moment
to review these installation instructions before you begin to install these components on your vehicle. The
removal and installation of air suspension products should only be performed by a fully qualified, ASE
Certified, professional.
It is equally important to be aware of all necessary safety measures while installing your new Air Suspension
System. This includes proper lifting and immobilizing of the vehicle and isolation of any stored energy to
prevent personal injury or property damage.
"Engineered to Ride, Built to Last ®"
WARNING: The air suspension system is under pressure (up to 10 bar, or 150 lbf/in). Verify pressure has been relieved
and disconnect power to the air suspension system prior to disassembly. Do not allow dirt or grease to enter the system.
Always wear standard hand, ear, and eye protection when servicing the air suspension system.
Arnott® is committed to the quality of its products. If you have a question or problem with any Arnott product,
please contact Arnott by calling 800-251-8993 during normal business hours or email
[email protected].
(In the EU please call +31 (0)73 7850 580 or email
[email protected])
1
AS-3414
REV 2
11/8/2022
AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
GENERAL INFORMATION:
Reading this manual signifies your agreement to the terms of the general release, waiver of liability, and hold harmless agreement,
the full text of which is available at www.arnottinc.com.
•
•
•
•
Not to be stored below 5oF (-15oC) or above 122oF (50oC).
Avoid damage to air lines and cables.
Removal and installation is only to be performed by fully qualified personnel.
Use car manufacturer’s diagnostic software.
CAUTION: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified
in the instructions or in a different sequence.
To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to
disconnect your battery.
Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for
additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath
the vehicle if it is not adequately supported, as serious injuries and death can occur.
AIR STRUT REMOVAL
1.
SET STEERING TO STRAIGHT AHEAD.
2.
RAISE VEHICLE.
3.
REMOVE THE RIGHT FRONT WHEEL. (FIGURE 1)
FIGURE 1
2
AS-3414
REV 2
11/8/2022
AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
4.
REMOVE THE STRUT CAP TO GAIN ACCESS TO THE AIR LINE. (FIGURES 2, 3)
FIGURE 2
5.
LOOSEN AND REMOVE THE AIR LINE FITTING FROM THE TOP OF THE STRUT. (FIGURES 4, 5)
FIGURE 4
3
FIGURE 3
AS-3414
FIGURE 5
REV 2
11/8/2022
AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
6.
DISCONNECT ELECTRICAL CONNECTION ON THE BOTTOM MOUNT OF THE STRUT. (FIGURE 6)
FIGURE 6
7.
REMOVE THE STRUT WIRE BRACKET. BRACKET WILL BE REUSED IN INSTALLATION. ENSURE ALL WIRES AND
BRAKE LINE ARE FREE FROM POSSIBLE ENTANGLEMENT DURING SRUT REMOVAL. (FIGURE 7)
FIGURE 7
4
AS-3414
REV 2
11/8/2022
AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
8.
REMOVE THE SWAY ARM LINK NUT AND DISCONNECT THE SWAY ARM FROM THE STRUT. (FIGURES 8, 9)
FIGURE 8
9.
REMOVE THE TWO (2) LOWER STRUT BOLTS LOCATED OPPOSITE OF EACH OTHER AT THE WHEEL CARRIER.
(FIGURES 10, 11)
FIGURE 10
10.
FIGURE 11
REMOVE THE UPPER STRUT BOLT AT THE WHEEL CARRIER. (FIGURES 12, 13)
FIGURE 12
5
FIGURE 9
AS-3414
FIGURE 13
REV 2
11/8/2022
AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
11.
SUPPORT THE BODY OF THE STRUT AND REMOVE THE THREE (3) TOP MOUNT BOLTS. (FIGURES 14, 15)
FIGURE 14
12.
FIGURE 15
REMOVE THE AIR STRUT FROM THE VEHICLE. (FIGURE 16)
FIGURE 16
13.
6
REMOVAL COMPLETE.
AS-3414
REV 2
11/8/2022
AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
AIR STRUT INSTALLATION
Tighten all nuts and bolts to manufacturer's specifications during the installation process.
Do not remove the air fitting from the air strut. Doing so may cause damage and/or void warranty. Remove the white
shipping pin from the new air fitting and insert the air line until fully seated.
1.
INSTALL THE NEW ARNOTT STRUT INTO THE VEHICLE. (FIGURE 17)
NOTE: WHEN INSTALLING THE STRUT, MAKE SURE THE ELCTRICAL CONNECTIONS AND BRAKE LINES
ARE ORIENTATED CORRECTLY TO AVOID ENTANGLEMENT WITH THE NEW STRUT.
FIGURE 17
2.
LOOSELY INSTALL THE THREE (3) TOP MOUNT BOLTS BY HAND TO HOLD THE AIR STRUT IN PLACE.
(FIGURE 18)
FIGURE 18
7
AS-3414
REV 2
11/8/2022
AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
3.
REINSTALL THE TOP MOUNT BOLT AT THE WHEEL CARRIER. TIGHTEN TO MANUFACTURER'S
SPECIFICATIONS. (FIGURES 19, 20)
FIGURE 19
4.
FIGURE 20
REINSTALL THE TWO (2) BOTTOM MOUNT BOLTS AT THE WHEEL CARRIER. TIGHTEN TO MANUFACTURER'S
SPECIFICATIOMS. (FIGURE 21)
FIGURE 21
8
AS-3414
REV 2
11/8/2022
AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
5.
REINSTALL THE SWAY ARM LINKAGE. TIGHTEN TO MANUFACTURER'S SPECIFICATIONS. (FIGURE 22)
FIGURE 22
6.
REINSTALL THE STRUT WIRE MOUNTING BRACKET. SECURE ALL WIRES AND BRAKE LINE. (FIGURE 23)
FIGURE 23
7.
CONNECT THE STRUT ELECTRICAL CONNECTION. (FIGURE 24)
FIGURE 24
9
AS-3414
REV 2
11/8/2022
AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
8.
TIGHTEN THE THREE (3) TOP MOUNT BOLTS TO MANUFACTURER'S SPECIFICATIONS. (FIGURE 25)
FIGURE 25
9.
REMOVE THE WHITE PLASTIC SHIPPING PIN FROM THE AIR LINE FITTING AND DISCARD.
(FIGURE 26)
FIGURE 26
10
AS-3414
REV 2
11/8/2022
AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
10.
PREPARE THE AIR LINE FOR INSTALLATION BY REMOVING THE OLD AIR FITTING AS DEMONSTRATED BELOW.
(FIGURE 27)
NOTE:
SCRATCHES AND/OR DEEP
CUTS IN THE AIR LINE CAN
RESULT IN POSSIBLE LEAKS. INSPECT THE AIR LINE
BEFORE INSERTION. AIR LINE NEEDS TO BE
REPLACED IF DAMAGED.
PRIOR TO INSERTING THE EXISTING AIR LINE INTO THE
NEW AIR FITTING YOU WILL NEED TO REMOVE THE
OLD ORIGINAL EQUIPMENT AIR LINE FITTING.
#1
#2
OE AIR LINE FITTING.
#3
#4
SLIDE THE THREADED PORTION SLIDE THE AIR FITTING OFF OF
UP THE LINE AND SPREAD THE
THE AIR LINE.
COLLET OPEN TO REMOVE.
AIR LINE IS READY FOR
INSTALLATION.
FIGURE 27
11.
INSTALL THE AIR LINE INTO THE AIR LINE FITTING ON THE STRUT. PRESS THE AIR LINE IN FIRMLY UNTIL IT IS
FULLY SEATED IN THE FITTING. (FIGURES 28, 29)
FIGURE 28
11
AS-3414
FIGURE 29
REV 2
11/8/2022
AS-3414
ARNOTT
NEW FRONT RIGHT AIR STRUT
2012-2017 MERCEDES-BENZ CLS-CLASS (W218)
W/AIRMATIC, W/OUT 4-MATIC, INCL. AMG
12.
REINSTALL THE STRUT CAP. (FIGURE 30)
FIGURE 30
13.
REINSTALL THE RIGHT FRONT WHEEL.
14.
INFLATE AIR SYSTEM PER MANUFACTURER'S SPECIFICATIONS.
15.
LOWER VEHICLE.
16.
INSTALLATION COMPLETE.
12
AS-3414
REV 2
11/8/2022